Operating instructions

R&S ESCI HCOPy Subsystem
1166.6004.12 6.105 E-1
HCOPy:ITEM:WINDow<1|2>:TABle:STATe ON | OFF
This command selects the output of the currently displayed tables.
Example: "HCOP:ITEM:WIND:TABL:STAT ON"
Characteristics: *RST value: OFF
SCPI: device-specific
Mode: all
The command HCOPy:DEVice:ITEM:WINDow<1|2>:TABle:STATe OFF as well as command
HCOPy:DEVice:ITEM:ALL enables the output of the whole screen.
HCOPy:ITEM:WINDow<1|2>:TEXT <string>
This command defines the comment text for measurement window 1 or 2 for printout, with a
maximum of 100 characters; line feed by means of character @).
Example: "HCOP:ITEM:WIND2:TEXT ‘comment’"
Characteristics: *RST value: -
SCPI: device-specific
Mode: all
HCOPy:ITEM:WINDow<1|2>:TRACe:STATe ON | OFF
This command selects the output of the currently displayed trace.
Example: "HCOP:ITEM:WIND:TRACe:STAT ON"
Characteristics: *RST value: OFF
SCPI: device-specific
Mode: all
The command HCOPy:ITEM:WINDow<1|2>:TRACe:STATe OFF as well as command
HCOPy:ITEM:ALL enables the output of the whole screen.
HCOPy:PAGE:ORIentation<1|2> LANDscape | PORTrait
The command selects the format of the output (portrait and landscape) (hardcopy unit 1 or 2).
Note:
The command is only available provided that the output device "printer" (HCOP:DEST
'SYST:COMM:PRIN’) has been selected.
Example: "HCOP:PAGE:ORI LAND"
Characteristics: *RST value: -
SCPI: conforming
Mode: all