Operating instructions

SENSe:CORRection Subsystem R&S ESCI
1166.6004.12 6.158 E-1
[SENSe<1|2>:]CORRection:COLLect[:ACQuire] THRough | OPEN
When the tracking generator is active, this command determines the type of result acquisition for the
normalization reference measurement and starts the measurement selected:
THRough "TRANsmission" mode: calibration with direct connection between tracking
generator and device input.
"REFLection" mode: calibration with short circuit at the input
OPEN only valid in "REFLection" mode: calibration with open input
To obtain a valid reference measurement, a complete sweep with synchronization to the end of the
sweep must have been carried out. This is only possible in the single sweep mode.
Example: "INIT:CONT OFF" 'Selects single sweep operation
"CORR:COLL THR;*WAI" 'Starts the measurement of reference data using
'direct connection between generator and device
'input and waits for the sweep end.
Characteristics: *RST value: --
SCPI: conforming
Mode: A
This command is an "event" and therefore has no *RST value and no query. It is only valid in
conjunction with the tracking /external generator option (B9/B10).
[SENSe<1|2>:]CORRection:RECall
This command restores the instrument setting that was valid for the measurement of the reference
data, provided that the tracking generator is active.
Example: "CORR:REC"
Characteristics: *RST value: -
SCPI: conforming
Mode: A
This command is an event and therefore has no *RST value and no query.
This command is only valid in conjunction with the tracking / ext. generator control option (B9/B10).
[SENSe<1|2>:]CORRection:TRANsducer:SELect <name>
This command selects the transducer factor designated by <name>. If <name> does not exist yet, a
new transducer factor is created.
This command must be sent prior to the subsequent commands for modifying/activating transducer
factors.
Parameter: <name>::= Name of the transducer factor in string data form with a
maximum of 8 characters.
Example: ":CORR:TRAN:SEL 'FACTOR1'"
Characteristics: *RST value: -
SCPI: device-specific
Modes: A