Operating instructions

R&S ESCI SENSe:POWer Subsystem
1166.6004.12 6.181 E-1
SENSe:POWer Subsystem
This subsystem controls the setting of the instrument's channel and adjacent channel power
measurements. The measurement windows are selected by SENSe1 (screen A) and SENSe2
(screen B).
COMMAND PARAMETERS UNIT COMMENT
[SENSe<1|2>]
:POWer
:ACHannel
:SPACing
:CHANnel
[:ACHannel]
:ALTernate<1|2>
:TXCHannel
:COUNt
:ACPairs
:BANDwidth
[:CHANnel]
:ACHannel
:ALTernate<1|2>
:BWIDth
[:CHANnel]
:ACHannel
:ALTernate<1|2>
:MODE
:REFerence
:AUTO
:TXCHannel
:AUTO
:MANUAL
:PRESet
:RLEVel
:BANDwidth
:BWIDth
:HSPeed
:NCORrection
:TRACe
<numeric_value>
<numeric_value>
<numeric_value>
<numeric_value>
0 | 1 | 2 | 3
<numeric_value>
<numeric_value>
<numeric_value>
<numeric_value>
<numeric_value>
<numeric_value>
ABSolute | RELative
ONCE
MINimum | MAXimum | LHIGhest
1 | 2 | 3 | 4
ACPower | CPOWer | MCACpower |
OBANdwidth |OBWidth | CN | CN0
<numeric_value>
<numeric_value>
<Boolean>
<Boolean>
<numeric_value>
HZ
HZ
HZ
HZ
HZ
HZ
HZ
HZ
HZ
PCT
PCT
--
no query
no query
no query
[SENSe<1|2>:]POWer:ACHannel:SPACing:CHANnel 100 Hz to 2000 MHz
This command defines the channel spacing for the carrier signals.
The command is available only for measurements in the frequency domain (span > 0).
Example: "POW:ACH:SPAC:CHAN 25kHz"
Characteristics: *RST value: 20 kHz
SCPI: device-specific
Mode:A-F