Operating instructions

SENSe:SCAN Subsystem R&S ESCI
1166.6004.12 6.190 E-1
[SENSe<1|2>:]SCAN<1 to 10>:INPut:GAIN:AUTO ON | OFF
This command includes the preamplifier in the autoranging function of the selected receiver scan
range.
Example: ":SCAN1:INP:GAIN:AUTO ON" 'Includes the preamplifier in the autoranging
'function for scan range 1
Characteristics: *RST value: OFF
SCPI: device-specific
Mode:R
[SENSe<1|2>:]SCAN:RANGes[:COUNt] 1 to 10
This command determines the number of ranges. With setting 0, the scan is performed using the
current receiver settings and not the settings defined with commands SENSe:SCAN:....
Example: "SCAN:RANG:COUN 3" 'Sets the number of ranges to 3
Characteristics: *RST value: 0
SCPI: device-specific
Mode:R