Operating instructions

R&S ESCI SENSe:SWEep Subsystem

1166.6004.12 6.195 E-1

SENSe:TV Subsystem

This subsystem controls the TV trigger part of option R&S FSP-B6 (TV and RF trigger). The setup of the

individual trigger parameters is included in subsystem TRIGger.

COMMAND PARAMETERS UNIT COMMENT

[SENSe<1|2>]

:TV

[:STATe]

:CCVS

INTernal | EXTernal

Option TV and RF Trigger

[SENSe<1|2>:]TV[:STATe]ON | OFF

This command switches triggering on TV signals on or off.

Example: "TV ON"

Characteristics: *RST value: OFF

SCPI: device-specific

Modes:A-T

This command is only available with option R&S FSP-B6 (TV and RF Trigger).

[SENSe<1|2>:]TV:CCVS INTernal | EXTernal

This command selects between an internal and an external CCVS signal as TV demodulator input

signal.

Example: " TV:CCVS EXT"

Characteristics: *RST value: INT

SCPI: device-specific

Modes:A-T

This command is only available with option R&S FSP-B6 (TV and RF Trigger).