Operating instructions

R&S ESCI STATus Subsystem
1166.6004.12 6.205 E-1
STATus:QUEStionable:PTRansition 0 to 65535
This command sets the edge detectors of all bits of the STATus:QUEStionable register from 0 to 1
for the transitions of the CONDition bit.
Example: "STAT:QUES:PTR 65535"
Characteristics: *RST value: –
SCPI: conforming
Mode: all
STATus:QUEStionable:NTRansition 0 to 65535
This command sets the edge detectors of all bits of the STATus:OPERation register from 1 to 0 for
the transitions of the CONDition bit.
Example: "STAT:QUES:NTR 65535"
Characteristics: *RST value: –
SCPI: conforming
Mode: all
STATus:QUEStionable:POWer[:EVENt]?
This command queries the contents of the EVENt section of the STATus:QUEStionable:POWer
register. Readout deletes the contents of the EVENt section.
Example: "STAT:QUES?"
Characteristics: *RST value: –
SCPI: conforming
Mode: all
STATus:QUEStionable:POWer:CONDition?
This command queries the contents of the CONDition section of the STATus:QUEStionable:POWer
register. Readout does not delete the contents of the CONDition section.
Example: "STAT:QUES:COND?"
Characteristics: *RST value: –
SCPI: conforming
Mode: all
STATus:QUEStionable:POWer:ENABle 0 to 65535
This command sets the bits of the ENABle section of the STATus:QUEStionable:POWer register.
The ENABle register selectively enables the individual events of the associated EVENt section for
the summary bit.
Example: "STAT:QUES:ENAB 65535"
Characteristics: *RST value: –
SCPI: conforming
Mode: all