Operating instructions

STATus Subsystem R&S ESCI
1166.6004.12 6.206 E-1
STATus:QUEStionable:POWer:PTRansition 0 to 65535
This command sets the edge detectors of all bits of the STATus:QUEStionable:POWer register from
0 to 1 for the transitions of the CONDition bit.
Example: "STAT:QUES:PTR 65535"
Characteristics: *RST value: –
SCPI: conforming
Mode: all
STATus:QUEStionable:POWer:NTRansition 0 to 65535
This command sets the edge detectors of all bits of the STATus:QUEStionable:POWer register from
1 to 0 for the transitions of the CONDition bit.
Example: "STAT:QUES:NTR 65535"
Characteristics: *RST value: –
SCPI: conforming
Mode: all
STATus:QUEStionable:LIMit<1|2> [:EVENt]?
This command queries the contents of the EVENt section of the STATus:QUEStionable:LIMit
register. Readout deletes the contents of the EVENt section.
Example: "STAT:QUES?"
Characteristics: *RST value: –
SCPI: device-specific
Mode: all
STATus:QUEStionable:LIMit<1|2>:CONDition?
This command queries the contents of the CONDition section of the STATus:QUEStionable:LIMit
register.
Readout does not delete the contents of the CONDition section.
Example: "STAT:QUES:LIM:COND?"
Characteristics: *RST value: –
SCPI: device-specific
Mode: all
STATus:QUEStionable:LIMit<1|2>:ENABle 0 to 65535
This command sets the bits of the ENABle section of the STATus:QUEStionable register. The
ENABle register selectively enables the individual events of the associated EVENt section for the
summary bit.
Example: "STAT:QUES:ENAB 65535"
Characteristics: *RST value: –
SCPI: device-specific
Mode: all