Operating instructions

R&S ESCI STATus Subsystem
1166.6004.12 6.207 E-1
STATus:QUEStionable:LIMit<1|2>:PTRansition 0 to 65535
This command sets the edge detectors of all bits of the STATus:QUEStionable:LIMit register from 0
to 1 for the transitions of the CONDition bit.
Example: "STAT:QUES:PTR 65535"
Characteristics: *RST value: –
SCPI: device-specific
Mode: all
STATus:QUEStionable:LIMit<1|2>:NTRansition 0 to 65535
This command sets the edge detectors of all bits of the STATus:QUEStionable:LIMit register from 1
to 0 for the transitions of the CONDition bit.
Example: "STAT:QUES:NTR 65535"
Characteristics: *RST value: –
SCPI: device-specific
Mode: all
STATus:QUEStionable:LMARgin<1|2> [:EVENt]?
This command queries the contents of the EVENt section of the STATus:QUEStionable:LMARgin
register. Readout deletes the contents of the EVENt section.
Example: "STAT:QUES:LMAR?"
Characteristics: *RST value: –
SCPI: device-specific
Mode: all
STATus:QUEStionable:LMARgin<1|2>:CONDition?
This command queries the contents of the CONDition section of the
STATus:QUEStionable:LMARgin register. Readout does not delete the contents of the CONDition
section.
Example: "STAT:QUES:LMAR:COND?"
Characteristics: *RST value: –
SCPI: device-specific
Mode: all
STATus:QUEStionable:LMARgin<1|2>:ENABle 0 to 65535
This command sets the bits of the ENABle section of the STATus:QUEStionable:LMARgin register.
The ENABle register selectively enables the individual events of the associated EVENt section for
the summary bit.
Example: "STAT:QUES:LMAR:ENAB 65535"
Characteristics: *RST value: –
SCPI: device-specific
Mode: all