Operating instructions

STATus Subsystem R&S ESCI
1166.6004.12 6.208 E-1
STATus:QUEStionable:LMARgin<1|2>:PTRansition 0 to 65535
This command sets the edge detectors of all bits of the STATus:QUEStionable:LMARgin register
from 0 to 1 for the transitions of the CONDition bit.
Example: "STAT:QUES:LMAR:PTR 65535"
Characteristics: *RST value: –
SCPI: device-specific
Mode: all
STATus:QUEStionable:LMARgin<1|2>:NTRansition 0 to 65535
This command sets the edge detectors of all bits of the STATus:QUEStionable:LMARgin register
from 1 to 0 for the transitions of the CONDition bit.
Example: "STAT:QUES:LMAR:NTR 65535"
Characteristics: *RST value: –
SCPI: device-specific
Mode: all
STATus:QUEStionable:SYNC[:EVENt]?
This command queries the contents of the EVENt section of the STATus:QUEStionable:SYNC
register. Readout deletes the contents of the EVENt section.
Example: "STAT:QUES:SYNC?"
Characteristics: *RST value: –
SCPI: device-specific
Modes: all
STATus:QUEStionable:SYNC:CONDition?
This command queries the contents of the CONDition section of the STATus:QUEStionable:SYNC
register. Readout does not delete the contents of the CONDition section.
Example: "STAT:QUES:SYNC:COND?"
Characteristics: *RST value: –
SCPI: device-specific
Modes: all
STATus:QUEStionable:SYNC:ENABle 0 to 65535
This command sets the bits of the ENABle section of the STATus:QUEStionable: SYNC register.
The ENABle register selectively enables the individual events of the associated EVENt section for
the sum bit in the status byte.
Example: "STAT:QUES:SYNC:ENAB 65535"
Characteristics: *RST value: –
SCPI: device-specific
Modes: all