Operating instructions

R&S ESCI STATus Subsystem
1166.6004.12 6.209 E-1
STATus:QUEStionable:SYNC:PTRansition 0 to 65535
This command sets the edge detectors of all bits of the STATus:QUEStionable: SYNC register from
0 to 1 for the transitions of the CONDition bit.
Example: "STAT:QUES:SYNC:PTR 65535"
Characteristics: *RST value: –
SCPI: device-specific
Modes: all
STATus:QUEStionable:SYNC:NTRansition 0 to 65535
This command sets the edge detectors of all bits of the STATus:QUEStionable: SYNC register from
1 to 0 for the transitions of the CONDition bit.
Example: "STAT:QUES:SYNC:NTR 65535"
Characteristics: *RST value: –
SCPI: device-specific
Modes: all
STATus:QUEStionable:ACPLimit[:EVENt]?
This command queries the contents of the EVENt section of the STATus:QUEStionable:ACPLimit
register. Readout deletes the contents of the EVENt section.
Example: "STAT:QUES:ACPL?"
Characteristics: *RST value: –
SCPI: device-specific
Mode: all
STATus:QUEStionable:ACPLimit:CONDition?
This command queries the contents of the CONDition section of the
STATus:QUEStionable:ACPLimit register. Readout does not delete the contents of the CONDition
section.
Example: "STAT:QUES:ACPL:COND?"
Characteristics: *RST value: –
SCPI: device-specific
Mode: all
STATus:QUEStionable:ACPLimit:ENABle 0 to 65535
This command sets the bits of the ENABle section of the STATus:QUEStionable:ACPLimit register.
The ENABle register selectively enables the individual events of the associated EVENt section for
the summary bit.
Example: "STAT:QUES:ACPL:ENAB 65535"
Characteristics: *RST value: –
SCPI: device-specific
Mode: all