Operating instructions

STATus Subsystem R&S ESCI
1166.6004.12 6.210 E-1
STATus:QUEStionable:ACPLimit:PTRansition 0 to 65535
This command sets the edge detectors of all bits of the STATus:QUEStionable: ACPLimit register
from 0 to 1 for the transitions of the CONDition bit.
Example: "STAT:QUES:ACPL:PTR 65535"
Characteristics: *RST value: –
SCPI: device-specific
Mode: all
STATus:QUEStionable:ACPLimit:NTRansition 0 to 65535
This command sets the edge detectors of all bits of the STATus:QUEStionable: ACPLimit register
from 1 to 0 for the transitions of the CONDition bit.
Example: "STAT:QUES:ACPL:NTR 65535"
Characteristics: *RST value: –
SCPI: device-specific
Mode: all
STATus:QUEStionable:FREQuency[:EVENt]?
This command queries the contents of the EVENt section of the STATus:QUEStionable: FREQuency
register.
Example: "STAT:QUES:FREQ?"
Characteristics: *RST value: –
SCPI: device-specific
Mode: all
Readout deletes the contents of the EVENt section.
STATus:QUEStionable:FREQuency:CONDition?
This command queries the contents of the CONDition section of the
STATus:QUEStionable:FREQuency register. Readout does not delete the contents of the CONDition
section.
Example: "STAT:QUES:FREQ:COND?"
Characteristics: *RST value: –
SCPI: device-specific
Mode: all
STATus:QUEStionable:FREQuency:ENABle 0 to 65535
This command sets the bits of the ENABle section of the STATus:QUEStionable:FREQuency
register. The ENABle register selectively enables the individual events of the associated EVENt
section for the summary bit.
Example: "STAT:QUES:FREQ:ENAB 65535"
Characteristics: *RST value: –
SCPI: device-specific
Mode: all