Operating instructions

TRIGger Subsystem R&S ESCI
1166.6004.12 6.236 E-1
TRIGger<1|2>[:SEQuence]:SLOPe POSitive | NEGative
This command selects the slope of the trigger signal. The selected trigger slope applies to all trigger
signal sources .
Example: "TRIG:SLOP NEG"
Characteristics: *RST value: POSitive
SCPI: conforming
Mode: all
TRIGger<1|2>[:SEQuence]:VIDeo:FORMat:LPFRame 525 | 625
This command defines the line system in use (525 or 625 lines) with active TV trigger.
Example: "TRIG:VID:FORM:LPFR 525"
Characteristics: *RST value:
SCPI: conforming
Mode:A-T
This command is only available with option R&S FSP-B6 (TV and RF Trigger).
TRIGger<1|2>[:SEQuence]:VIDeo:LINE:NUMBer <numeric_value>
With active TV trigger this command activates triggering at the horizontal sync signal of the indicated
line number.
Example: "TRIG:VID:LINE:NUMB 17"
Characteristics: *RST value:
SCPI: conforming
Mode:A-T
This command is only available with option R&S FSP-B6 (TV and RF Trigger).
TRIGger<1|2>[:SEQuence]:VIDeo:FIELd:SELect ALL | ODD | EVEN
With active TV trigger this command activates triggering at the vertical sync signal.
The measurement is triggered on both fields with selection ALL, on odd fields with selection ODD
and on even fields with selection EVEN.
Example: "TRIG:VID:FIEL:SEL ALL"
Characteristics: *RST value:
SCPI: conforming
Mode:A-T
This command is only available with option R&S FSP-B6 (TV and RF Trigger).
TRIGger<1|2>[:SEQuence]:VIDeo:SSIGnal:POLarity NEGative | POSitive
With active TV trigger this command selects the polarity of the video sync signal.
Example: "TRIG:VID:SSIG:POL NEG "
Characteristics: *RST value:
SCPI: conforming
Mode:A-T
This command is only available with option R&S FSP-B6 (TV and RF Trigger).