Operating instructions

R&S ESCI UNIT Subsystem
1166.6004.12 6.237 E-1
UNIT Subsystem
The UNIT subsystem is used to switch the basic unit of setting parameters. A distinction is made
between UNIT1 (screen A) and UNIT2 (screen B).
COMMAND PARAMETERS UNIT COMMENT
UNIT<1|2>
:ANGLe
:POWer
DEG | RAD
DBM | V | A | W |
DBPW | WATT |
DBUV | DBMV | VOLT |
DBPT | DBUA | AMPere |
DBUV_M | DBUA_M
UNIT<1|2>:ANGLe DEG | RAD
This command selects the default unit for angles.
Example: "UNIT:ANGL DEG" 'Sets the unit "degree" for screen A.
Characteristics: *RST value: RAD
SCPI: conforming
Mode: FM
UNIT<1|2>:POWer DBM | DBPW | WATT | DBUV | DBMV | VOLT |DBUA | AMPere | DB | DBPT |
DBUV_M | DBUA_M
This command selects the default unit for the selected measurement window.
Example: "UNIT:POW DBUV" 'Sets the power unit for screen A to dBm.
Characteristics: *RST value: DBM
SCPI: conforming
Mode: A