Operating instructions

R&S ESCI IEC/IEEE-Bus Commands of HP Models
1166.6004.12 6.255 E-1
Function
Category
Function HP 8590
Command
Supported Command Subset Known Differences
Marker Search MKPK MKPK
MKPK HI
MKPK NH
MKPK NR
MKPK NL
Marker Peak
Threshold
MKPT MKPT
MKPT HI
MKPT NH
MKPT NR
MKPT NL
Different step size
Peak Excursion MKPX MKPX <numeric_value> DB
MKPX DN
MKPX UP
MKPX?
Different step size
Ref Level = Marker
Level
MKRL MKRL
CF Stepsize = Marker
Freq
MKSS MKSS
Marker to Trace MKTRACE MKTRACE TRA|TRB|TRC
Signal Track MKTRACK MKTRACK ON|OFF
MKTRACK 1|0
MKTRACK?
Preset
Instrument preset IP
RESET
IP
RESET
The device performs a PRESET.
For default setting, see section "Model-
Dependent Default Settings".
Printer
Hardcopy
PRINT
1)
PRINT
Program Flow
Stop previous function
ABORT
1)
ABORT Does not automatically set the command
complete bit (bit 4) in the status byte. An
additional DONE is required for that
purpose.
Recall or Save
Recall analyzer state RCLS RCLS <numeric_value>
Save analyzer state SAVES SAVES <numeric_value>
Span
Full Span FS FS Full span value
Frequency Span value SP SP <numeric_value>
SP DN
SP UP
SP?
Default value
Step size
Formula for dependent values (resolution
bandwidth, video bandwidth, sweep time)
1)
HP8594E only