Operating instructions

R&S ESCI IEC/IEEE-Bus Commands of HP Models
1166.6004.12 6.259 E-1
8566A / 8568A
Command
Supported Command Subset Known Differences
CS
CT
Calculation formula of coupled
sweep time
CV
Default ratio span / RBW
DL DL <numeric_value> DB|DM
DL DN
DL UP
DL?
E1
E2
E3
E4
FA FA <numeric_value> HZ|KHZ|MHZ|GHZ
FA UP
FA DN
FA?
Default value
Range of values
Step size
FB FB <numeric_value> HZ|KHZ|MHZ|GHZ
FB UP
FB DN
FB?
Default value
Range of values
Step size
FS
I1 The command is accepted
without an error message being
output, but it is ignored.
I2 The command is accepted
without an error message being
output, but it is ignored.
ID Query of instrument type.
The instrument type entered with
SETUP - GENERAL SETUP -
GPIB - ID STRING USER will be
returned.
IP The device performs a PRESET.
For default setting ,see section "Model-Dependent
Default Settings".
In the remote mode, the screen area for measurement display
will be reduced. The LOCAL softkey (lowermost softkey) will
be shifted slightly towards the center of the screen.
KS KS= <numeric_value> HZ|KHZ|MHZ|GHZ
KS= DN
KS= UP
KS=?
KSA
KSB
KSC
KSD
KSE KSE <numeric_value>|<char data>@
KSG KSG