Operating instructions

R&S ESCI Status Reporting System
1166.6004.12 5.23 E-1
STATus:OPERation Register
In the CONDition part, this register contains information on which actions the instrument is being
executing or, in the EVENt part, information on which actions the instrument has executed since the last
reading. It can be read using commands "STATus:OPERation:CONDition?" or "STATus
:OPERation[:EVENt]?".
Table 5-4 Meaning of the bits in the STATus.OPERation register
Bit No. Meaning
0
CALibrating
This bit is set as long as the instrument is performing a calibration.
1 to 7 These bits are not used
8
SCAN results available
This bit is set after a scan..
8
HCOPy in progress
This bit is set while the instrument is printing a hardcopy.
10 to 14 These bits are not used
15 This bit is always 0