Operating instructions

CALCulate:DELTamarker Subsystem R&S ESCI
1166.6004.12 6.10 E-1
CALCulate<1|2>:DELTamarker<1 to 4>:MODE ABSolute | RELative
This command switches between relative and absolute frequency input of the delta marker (or time
with span = 0). It affects all delta markers independent of the measurement window.
Example: "CALC:DELT:MODE ABS" 'Switches the frequency/time indication for all
delta markers to absolute values.
"CALC:DELT:MODE REL" 'Switches the frequency/time indication for all
'delta markers to relative to marker 1.
Characteristics: *RST value: REL
SCPI: device-specific
Mode: R, A, FM
CALCulate<1|2>:DELTamarker<1 to 4>:AOFF
This command switches off all active delta markers in the selected measurement window (screen A
or screen B).
Example: "CALC2:DELT:AOFF" 'Switches off all delta markers in screen B.
Characteristics: *RST value: -
SCPI: device-specific
Mode: R, A, FM
This command is an event and therefore has no *RST value and no query.
CALCulate<1|2>:DELTamarker<1 to 4>:TRACe 1 to 3
This command assigns the selected delta marker to the indicated measurement curve in the
indicated measurement window. The selected measurement curve must be active, i.e. its state must
be different from "BLANK".
Example: "CALC:DELT3:TRAC 2" 'Assigns deltamarker 3 to trace 2 in screen A.
"CALC:DELT:TRAC 3" 'Assigns deltamarker 1 to trace 3 in screen B.
Characteristics: *RST value: -
SCPI: device-specific
Mode: R, A, FM
CALCulate<1|2>:DELTamarker<1 to 4>:X 0 to MAX (frequency | sweep time)
This command positions the selected delta marker in the indicated measurement window to the
indicated frequency (span > 0), time (span = 0) or level (APD measurement = ON or
CCDFmeasurement = ON). The input is in absolute values or relative to marker 1 depending on the
command CALCulate:DELTamarker:MODE. If Reference Fixed measurement
(CALCulate:DELTamarker:FUNCtion:FIXed:STATe ON) is active, relative values refer to the
reference position are entered. The query always returns absolute values.
Example: "CALC:DELT:MOD REL" 'Switches the input for all delta markers to
'relative to marker 1.
"CALC:DELT2:X 10.7MHz" 'Positions delta marker 2 in screen A
'10.7 MHz to the right of marker 1.
"CALC2:DELT:X?" 'Outputs the absolute frequency/time of delta
'marker 1 in screen B
"CALC2:DELT:X:REL?" 'Outputs the relative frequency/time/level of
'delta marker 1 in screen B
Characteristics: *RST value: -
SCPI: device-specific
Mode: R, A, FM