Operating instructions

R&S ESCI CALCulate:LIMit Subsystem
1166.6004.12 6.21 E-1
CALCulate<1|2>:LIMit<1 to 8>:NAME <name of limit line>
This command assigns a name to a limit line numbered 1 to 8. If it does not exist already, a limit line
with this name is created. The command is independent of the measurement window.
The name of the limit line may contain a maximum of 8 characters.
Example: "CALC:LIM1:NAME 'GSM1'" 'Assigns the name 'GSM1' to limit line 1.
Characteristics: *RST value: 'REM1' to 'REM8' for lines 1 to 8
SCPI: device-specific
Mode: R, A, FM
CALCulate<1|2>:LIMit<1 to 8>:DELete
This command deletes the selected limit line. The command is independent of the measurement
window.
Example: "CALC:LIM1:DEL" 'Deletes limit line 1.
Characteristics: *RST value: --
SCPI: device-specific
Mode: R, A, FM
This command is an event and therefore has no *RST value and no query.