Brochure

12
After the measurement sequence has been configured,
it can be transferred to the instruments in the field. The
operator in the field only needs to start the wizard, select
the measurement sequence and follow the predefined on
screen instructions. The instrument is correctly configured
for each test step, so that the operator does not need to
spend time on configuring the measurement instrument
on site.
The results are saved automatically as soon as all measure-
ments are completed, and can be transferred to a tablet
or a PC. A complete measurement report in PDF, RTF or
HTML format can be generated using the report generator
in the R&S®Instrument View software.
Reproducible and fast measurements
The measurement wizard and the report generator ensure
the following:
❙ The results are correct and reproducible; all measure
ments are performed correctly with the right settings and
in the right order; no need to come back to the site due
to incorrect measurement settings or setup
❙ Measurement time is extremely reduced thanks to
predened instrument settings; there is no need to set up
the instrument on site
❙ No training is required for novice users; less experienced
operators can reliably conduct measurements thanks to
onscreen instructions and preset measurement settings
❙ All measurement results are documented in a complete,
customizable measurement report, which can include
additional data such as operator or site name, company
name, location and instrument serial number
Site surveys or the installation and maintenance of trans-
mitter stations often require a standard set of spectrum
measurements. These measurements must be performed
correctly to avoid additional costs and time on site.
Simplified measurements
The measurement wizard simplifies measurements by
auto mating, standardizing and optimizing test sequences.
A sequence of standardized and recurring measurements
can be performed quickly, easily and without mistakes.
First, a measurement expert centrally creates the test se-
quences, using the R&S®Spectrum RiderFPH and the
R&S®Instrument View software running on a PC. Pictures
and written instructions can be added to each measure-
ment step.
Increasing
productivity through
measurement
wizard