Brochure

4
Excellent in the field
Wide range of accessories
A soft carrying bag, battery charger, spare batteries and
other accessories for work in the field are available.
Nonreflective display and backlit keypad designed
foroutdoor use
The 18 cm diameter (7") display is nonreflective, i.e. it
shows the measurement result and not a mirror image of
the operator. Adjusting the brightness makes the display
easy to view in outdoor environments. The blackand
white mode makes it readable even in bright sunlight. The
keypad can be illuminated for convenient work in dim en-
vironments. Large buttons and a rotary knob with enter
function make it easy to operate the instrument even
when wearing gloves.
Ruggedized in line with MIL-PRF-28800F class 2
The R&S®Spectrum RiderFPH has no vents or fans that
could suck in dirt or water. All interfaces and connectors
are protected. The instrument is tested in line with the
MILPRF28800F class 2 mechanical test specification for
work in rough environments. It is protected against dust
and dripping water in line with the IP51 specification.
Protected
connectors
and interfaces
Lightweight, small and long battery life
The unique combination of low weight, small footprint,
short boot time and the longest battery life on the market
makes the R&S®Spectrum RiderFPH ideal for work in the
field, even in remote, difficulttoreach locations.
The R&S®Spectrum RiderFPH can operate an entire work-
ing day (more than 6hours) without recharging or chang-
ing the battery. It weighs only 2.5kg (5.5lb) including
battery.
Examples of measurements in the field
❙ Verifying signal transmission (e.g. verifying 5G,
broadcast, radar and satellite communications link)
❙ Spectrum checking, site survey
❙ Interference hunting
❙ EMF measurement
❙ Microwave link alignment
Highcontrast black and white display mode enhances screen readability