Brochure

Rohde & Schwarz R&S®Spectrum RiderFPH Handheld Spectrum Analyzer 5
Excellent for lab
diagnostics
Solid RF performance for diagnostics in the lab
With a phase noise of –105dBc (1Hz) at 100kHz offset
from the carrier, a total measurement uncertainty of
0.5dB and its high sensitivity (displayed average noise
level (DANL) of typ. <–163dBm (10MHz to 3GHz
with preamplifier on)), the R&S®Spectrum RiderFPH is
a powerful and easytouse spectrum analyzer for RF
diagnostics in service and development labs.
Examples of measurements in the lab:
❙ Frequency and amplitude of any RF device
❙ Accurate frequency readings with the frequency counter,
e.g. for alignment of frequency references
❙ Measurement of spurious emissions
❙ Measurement of harmonics and intermodulation
products
❙ Measurement of pulsed signals in the time domain
EMI debugging with optional near-field probes
The R&S®HZ15/R&S®HZ17 nearfield probes are used as
diagnostic tools for EMI debugging, e.g. on circuit boards,
integrated circuits, cables and shielding. The nearfield
probe set is ideal for emission measurements from
30MHz to 3GHz. The R&S®HZ16 preamplifier improves
measurement sensitivity up to 3GHz, with approx. 20dB
gain and a noise figure of 4.5dB. In combination with
the R&S®Spectrum RiderFPH, the preamplifier and near
field probe set are a costeffective means of analyzing and
locating disturbance sources during development.
The R&S®Spectrum RiderFPH with nearfield probes and DUT