User Manual

Preparing for Use
R&S
®
FPL1000
23Getting Started 1323.1602.02 ─ 03
Passwords
For all default user accounts, the initial password is 894129. Note that this pass-
word is very weak, and it is recommended that you change the password for both
users after initial login. An administrator can change the password in Windows for
any user at any time via "Start > Settings > Account > SignIn Options > Password
> Change".
Changing the password and use of auto-login function
Note that when you change the default passwords, the default auto-login
function no longer works! Reactivate it manually as described in "Reactivat-
ing the automatic login function" on page 24.
3.2.3.1 Automatic Login Function
When shipped, the instrument automatically logs on the default "Instrument" user
to Windows using the default password.
Switching users when using the automatic login function
Which user account is used is defined during login. If automatic login is active, the
login window is not displayed. However, you can also switch the user account to
be used when the automatic login function is active.
1. Select the "Windows" icon in the toolbar to access the operating system of the
R&S FPL1000 (see also Chapter 3.2.4, "Accessing the Start Menu",
on page 25).
2. Press CTRL + ALT + DEL, then select "Sign out".
The "Login" dialog box is displayed, in which you can enter the different user
account name and password.
Deactivating the automatic login function
To deactivate the automatic login function, perform the following steps:
1. Log in to the R&S FPL1000 operating system using an administrator account
(see "Switching users when using the automatic login function" on page 23).
Windows Operating System