User Manual

Preparing for Use
R&S
®
FPL1000
24Getting Started 1323.1602.02 ─ 03
2. Select the "Windows" icon in the toolbar to access the operating system of the
R&S FPL1000 (see also Chapter 3.2.4, "Accessing the Start Menu",
on page 25).
3. In the "Start" menu, select "All applications > Windows System > Run".
The "Run" dialog box is displayed.
4. Enter the command
C:\Users\Public\Documents\Rohde-Schwarz\Analyzer\user\
NO_AUTOLOGIN.REG.
5. Press the ENTER key to confirm.
This command deactivates the automatic login function. The next time you
switch on the instrument, the operating system prompts you to enter your user
name and password before it starts the firmware.
Adapting the automatic login function to a new password
If you change the "Instrument" user's password, which is used during automatic
login, this function no longer works. Adapt the settings for the command that acti-
vates the auto login function first.
1. Open the
C:\Users\Public\Documents\Rohde-Schwarz\Analyzer\user\
NO_AUTOLOGIN.REG file in any text editor (e.g. Notepad).
2. In the line "DefaultPassword"="894129", replace the default password
(894129) by the new password for automatic login.
3. Save the changes to the file.
Reactivating the automatic login function
1. Log in to the R&S FPL1000 operating system using an administrator account
(see "Switching users when using the automatic login function" on page 23).
2. Select the "Windows" icon in the toolbar to access the operating system of the
R&S FPL1000 (see also Chapter 3.2.4, "Accessing the Start Menu",
on page 25).
Windows Operating System