User Manual

Preparing for Use
R&S
®
FPL1000
27Getting Started 1323.1602.02 ─ 03
Connecting a mouse
The mouse is detected automatically when it is connected.
Select "Start > Settings > Devices > Mouse & touchpad" to configure the mouse
properties. To access the Windows operating system, press the Windows key on
the external keyboard.
Connecting a printer
When printing a file, the instrument checks whether a printer is connected and
turned on and whether the appropriate printer driver is installed. If necessary,
printer driver installation is initiated. You only have to install a printer driver once.
To install a printer, select "Start > Settings > Devices > Add a printer or scanner".
To access the Windows operating system, press the Windows key on the external
keyboard.
You can load updated and improved driver versions or new drivers from an instal-
lation disk, USB memory stick or another external storage medium. If the instru-
ment is integrated in a network, you can also install driver data stored in a net-
work directory.
Select "Start > Settings > Devices > Device Manager > Update Device drivers" to
install the driver.
3.4 Connecting an External Monitor
You can connect an external monitor (or projector) to the DVI connector on the
rear panel of the R&S FPL1000 (see also Chapter 4.2.6, "DVI", on page 48).
Connecting an External Monitor