User Manual

Trying Out the Instrument
R&S
®
FPL1000
67Getting Started 1323.1602.02 ─ 03
a) Press the SWEEP key on the front panel.
b) Tap the "Sweep Config" softkey in the "Sweep" menu.
c) In the "Sweep Points" field, enter 32001.
d) Close the "Bandwidth" dialog box.
e) Press the RUN SINGLE key on the front panel to perform a new sweep
with the increased number of sweep points.
Figure 5-14: Zoomed peak with increased number of sweep points
Note that the trace becomes much more precise.
Zooming into the Display