User Manual

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
184User Manual 1178.3370.02 ─ 09
For details, see "How to Manage SEM Settings Files" on page 189.
Standard files for sub blocks (Multi-SEM measurements)
If more than one sub blocks are defined, the "Standard Files" tab and softkey are not
available. To load a standard file for an individual sub block, use the Multi-SEM (Sub
Block) Settings setting in the "Sub Blocks" tab.
Selecting Storage Location - Drive/ Path/ Files...........................................................184
File Name....................................................................................................................184
Load Standard.............................................................................................................185
File Explorer................................................................................................................185
Save Standard............................................................................................................ 185
Delete Standard.......................................................................................................... 185
Restore Standard Files............................................................................................... 185
Selecting Storage Location - Drive/ Path/ Files
Select the storage location of the file on the instrument or an external drive.
The default storage location for the SEM settings files is:
C:\ProgramData\Rohde-Schwarz\ZNL-FPL\sem_std.
Remote command:
MMEMory:CATalog on page 919
File Name
Contains the name of the data file without the path or extension.
By default, the name of a user file consists of a base name followed by an underscore.
Multiple files with the same base name are extended by three numbers, e.g.
limit_lines_005.
Measurements and Results