User Manual

The Spectrum Application (RF Measurements)

R&S

FPL1000

331User Manual 1178.3370.02 ─ 09

Filter Bandwidth Filter Type Application

50 kHz CFILter

100 kHz CFILter

150 kHz CFILter FM Radio

192 kHz CFILter PHS

200 kHz CFILter GSM

300 kHz CFILter

500 kHz CFILter J.83 (8-VSB DVB, USA); RF ID 14333

1 MHz CFILter CDMAone

1.228 MHz CFILter CDMAone

1.5 MHz CFILter DAB

2 MHz CFILter

3 MHz CFILter

3.75 MHz CFILter

5 MHz CFILter

CFILter

7.7 Trigger and Gate Configuration

Triggering means to capture the interesting part of the signal. Choosing the right trigger

type and configuring all trigger settings correctly allows you to detect various incidents

in your signals.

Gating allows you to restrict measurement analysis to the important part or parts of the

signal, for example bursts.

● Triggering.............................................................................................................. 331

● Gating....................................................................................................................340

7.7.1 Triggering

7.7.1.1 Triggered Measurements

In a basic measurement with default settings, the sweep is started immediately. How-

ever, sometimes you want the measurement to start only when a specific condition is

fulfilled, for example a signal level is exceeded, or in certain time intervals. For these

Trigger and Gate Configuration