User Manual

Remote Commands
R&S
®
FPL1000
935User Manual 1178.3370.02 ─ 09
ON | 1
Color printing
OFF | 0
Black and white printing
*RST: 1
Example:
HCOP:DEV:COL ON
HCOPy:DEVice:LANGuage<1|2> <arg0>
This command selects the file format for a print job.
Suffix:
<1|2>
.
1|2
Irrelevant.
Parameters:
<arg0> WMF | GDI | EWMF | BMP | PNG | JPEG | JPG | PDF | SVG |
DOC | RTF
GDI
Graphics Device Interface
Default format for output to a printer configured under Windows.
Must be selected for output to the printer interface.
Can be used for output to a file. The printer driver configured
under Windows is used to generate a printer-specific file format.
BMP, JPG, PNG
Data format for output to files only.
Example:
HCOP:DEV:LANG1 PNG
Manual operation: See "Destination" on page 477
See "File type" on page 488
See "File type" on page 497
HCOPy[:IMMediate<1|2>]
This command initiates a print job.
If you are printing to a file, the file name depends on MMEMory:NAME.
Suffix:
<1|2>
.
Irrelevant.
Manual operation: See "Print" on page 476
See "Save" on page 498
HCOPy[:IMMediate<1|2>]:NEXT
This command initiates a print job.
If you are printing to a file, the file name depends on MMEMory:NAME. This command
adds a consecutive number to the file name.
Managing Settings and Results