User Manual

Remote Commands
R&S
®
FPL1000
947User Manual 1178.3370.02 ─ 09
Manual operation: See "Title" on page 493
HCOPy:TREPort:ITEM:HEADer:STATe <State>
This command includes or excludes the complete set of measurement information from
the test report.
Parameters:
<State> ON | OFF
*RST: ON
Example:
HCOP:TREP:ITEM:HEAD:STAT ON
Includes the measurement information in the test report.
Manual operation: See "State" on page 493
HCOPy:TREPort:ITEM:LIST? [<ChannelType>]
This command queries the selected information to be included in the test report for a
specific channel type.
Parameters:
<ChannelType> Selects the channel type that you want to query the test report
configuration for.
When you omit the parameter, the command returns the configu-
ration of the currently selected channel.
Example:
HCOP:TREP:ITEM:LIST? SAN
Queries the items that are included in the test reports of the
Spectrum application.
Usage: Query only
Table 11-9: Available <ChannelTypes>
<ChannelType>
SAN Spectrum
HCOPy:TREPort:ITEM:LOGO <FileName>
This command selects a graphic (for example a company logo) that is shown at the top
of each page in the test report.
Use HCOPy:TREPort:ITEM:LOGO:CONTrol on page 948 to select the conditions
under which the picture is shown.
Parameters:
<FileName> String containing the location and name of the picture.
You can use the following file types: bmp, jpg, png, gif, emf or
wmf format.
Example:
HCOP:TREP:ITEM:LOGO 'C:\aPicture.jpg'
Includes a picture at the top of each page of the report.
Managing Settings and Results