User Manual

Operating the Instrument

R&S

FPL1000

78Getting Started 1323.1602.02 ─ 03

GAT The frequency sweep is controlled via the TRIGGER INPUT connector.

TDF A transducer factor is activated.

75 Ω The input impedance of the instrument is set to 75 Ω.

FRQ A frequency offset ≠ 0 Hz is set.

Changing the Channel Setup Name

The channel setups are labeled with their default name. If that name already

exists, a sequential number is added. You can change the name of the channel

setup by double-tapping the name in the channel bar and entering a new name.

6.1.2 Window Title Bar

Each channel in the R&S FPL1000 display can contain several windows. Each

window can display either a graph or a table as a result of the channel measure-

ment. The window title bar indicates which type of evaluation is displayed.

Trace Information in Window Title Bar

Information on the displayed traces is indicated in the window title bar.

1 3 4 5

(1) Trace color

Color of trace display in diagram

(2) Trace no.

Trace number (1 to 6)

(3) Detector

Selected detector:

AP AUTOPEAK detector

Pk MAX PEAK detector

Mi MIN PEAK detector

Sa SAMPLE detector

Av AVERAGE detector

Rm RMS detector

(4) Trace Mode

Sweep mode:

Clrw CLEAR/WRITE

Understanding the Display Information - Spectrum Mode