User Manual

Operating the Instrument
R&S
®
FPL1000
80Getting Started 1323.1602.02 ─ 03
"FXD" Fixed reference marker
"Phase Noise" Phase noise measurement
"Signal Count" Signal count
"TRK" Signal tracking
"Noise Meas" Noise measurement
"MDepth" AM modulation depth
"TOI" Third order intercept measurement
6.1.4 Frequency and Span Information in Diagram Footer
The information in the diagram footer (beneath the diagram) depends on the cur-
rent application, measurement, and result display.
For a default measurement in the Spectrum mode, the Diagram result display
contains the following information, for example:
Label Information
CF Center frequency
Span Frequency span (frequency domain display)
ms/ Time per division (time domain display)
Pts Number of sweep points or (rounded) number of currently displayed points
in zoom mode
6.1.5 Instrument and Status Information
Global instrument settings and functions (such as LXI configuration mode), the
instrument status and any irregularities are indicated in the status bar beneath the
diagram.
In the MultiView tab, the status bar always displays the information for the cur-
rently selected measurement.
The following information is displayed:
Understanding the Display Information - Spectrum Mode