User Manual

Preparing for Use
R&S
®
FPL1000
25Getting Started 1323.1602.02 ─ 03
3. In the "Start" menu, select "All applications > Windows System > Run".
The "Run" dialog box is displayed.
4. Enter the command
C:\Users\Public\Documents\Rohde-Schwarz\Analyzer\user\
AUTOLOGIN.REG.
5. Press the ENTER key to confirm.
This command reactivates automatic login function. It is active the next time
the instrument reboots.
3.2.4 Accessing the Start Menu
The Windows "Start" menu provides access to the Windows functionality and
installed programs.
To open the "Start" menu:
► In Windows 10:
Press the "Windows" key or the CTRL + ESC key combination on your (exter-
nal) keyboard.
All necessary system settings can be defined in the "Start > Settings" menu (for
required settings refer to the Windows documentation and to the hardware
description).
3.3 Connecting USB Devices
The USB interfaces of the R&S FPL1000 allow you to connect USB devices
directly to the instrument. Increase the number of possible connections using
USB hubs. Due to the large number of available USB devices, there is almost no
limit to the expansions that are possible with the R&S FPL1000.
The following list shows various USB devices that can be useful:
●
Memory stick for easy transfer of data to/from a computer (e.g. firmware
updates)
●
CD-ROM drives for easy installation of firmware applications
Connecting USB Devices