User Manual

Instrument Tour
R&S
®
FPL1000
40Getting Started 1323.1602.02 ─ 03
1 = Toolbar with standard application functions, e.g. print, save/open file etc.
2 = Tabs for individual channel setups
3 = Softkeys for function access
4 = Channel Setup bar for firmware and measurement settings
5 = Window title bar with diagram-specific (trace) information
6 = Measurement results area
7 = Diagram footer with diagram-specific information, depending on application
8 = Instrument status bar with error messages and date/time display
A touchscreen is a screen that is touch-sensitive, that is: the firmware reacts in a
specified way when you move your fingers on the screen. Using touchscreen ges-
tures, you can perform the following tasks (among others).
(See Chapter 5, "Trying Out the Instrument", on page 52)
●
Changing a setting
●
Changing the display
●
Changing the displayed result range in a diagram
●
Moving a marker
●
Zooming into a diagram
●
Selecting a new evaluation method
●
Scrolling through a result list or table
●
Saving or printing results and settings
To imitate a right-click by mouse using the touchscreen, for example to open a
context-sensitive menu for a specific item, press the screen for about 1 second.
For details on touchscreen gestures see Chapter 6.4, "Touchscreen Gestures",
on page 88.
4.1.2 Power Key
The POWER key is located on the lower left corner of the front panel. It starts up
and shuts down the instrument.
See also Chapter 3.1.8, "Switching the Instrument On and Off", on page 18.
4.1.3 USB
The front panel provides two female USB connectors (USB-A, 2.0 standard) to
connect devices like a keyboard or a mouse. A memory stick can be connected to
store and reload instrument settings and measurement data.
Front Panel View