User Manual

Instrument Tour
R&S
®
FPL1000
49Getting Started 1323.1602.02 ─ 03
4.2.7 LAN
The LAN interface can be used to connect the R&S FPL1000 to a local network
for remote control, printouts or data transfer. The assignment of the RJ-45 con-
nector supports twisted-pair category 5 UTP/STP cables in a star configuration
(UTP stands for unshielded twisted pair, and STP for shielded twisted pair).
For details, see Chapter 3.5, "Setting Up a Network (LAN) Connection",
on page 29.
4.2.8 USB
The rear panel provides two additional female USB (3.0 standard) connectors to
connect devices like a keyboard, a mouse or a memory stick (see also Chap-
ter 4.2.8, "USB", on page 49).
4.2.9 Sensor Connector
The LEMOSA female connector is used to connect power sensors of the
R&S NRP-Zxy family. For a detailed list of supported sensors, see the data sheet.
For details on configuring and using power sensors, see the User Manual.
This connector is provided by the "Additional Interfaces" option R&S FPL1-
B5.
4.2.10 Aux. Port
A 9-pole SUB-D male connector used as an input and output for low-voltage TTL
control signals (max. 5 V).
This connector is provided by the "Additional Interfaces" option R&S FPL1-
B5.
Rear Panel View