User Manual

Operating the Instrument
R&S
®
FPL1000
75Getting Started 1323.1602.02 ─ 03
● Frequency and Span Information in Diagram Footer...................................... 80
● Instrument and Status Information.................................................................. 80
● Error Information............................................................................................. 81
6.1.1 Channel Setup Bar
Using the R&S FPL1000 you can handle several different measurement tasks
(channels) at the same time (although they can only be performed asynchro-
nously). For each channel, a separate tab is displayed on the screen. To switch
from one channel display to another, simply select the corresponding tab.
If many tabs are displayed, select the tab selection list icon at the right end of the
channel bar. Select the channel you want to switch to from the list.
MultiView tab
An additional tab labeled "MultiView" provides an overview of all active channels
at a glance. In the "MultiView" tab, each individual window contains its own chan-
nel bar with an additional button. Tap this button, or double-tap in any window, to
switch to the corresponding channel display quickly.
Understanding the Display Information - Spectrum Mode