R&S®FPL1000 SIGNAL AND SPECTRUM ANALYZER Experience high performance wherever you take it Product Brochure Version 06.
AT A GLANCE The R&S®FPL1000 signal and spectrum analyzer makes measuring fast and simple. The intuitive touchscreen is straightforward and easy to use. With its solid RF performance, light weight and small footprint, the R&S®FPL1000 combines the functionality of a benchtop instrument with the portability of a handheld instrument. In an RF lab, the R&S®FPL1000 is as indispensable as an oscilloscope or multimeter. It is a single measuring instrument for a variety of measurement tasks.
BENEFITS Key facts ► ► ► ► ► ► ► ► ► ► Frequency range: 5 kHz to 7.
ONE INSTRUMENT FOR MULTIPLE APPLICATIONS The R&S®FPL1000 is a single measuring instrument for many types of measurements. You can use it for spectral measurements, for highly accurate power measurements with power sensors and for analyzing analog and digitally modulated signals. Spectrum analysis Signal analysis of analog and digitally modulated signals Even in its basic configuration, the R&S®FPL1000 is a true allrounder.
Scalar network analysis Noise figure and gain measurements Equipped with the R&S®FPL1-B9 option, the R&S®FPL1000 offers an internal CW source and a tracking generator for quick and easy measurement of frequency response, filters and attenuation. The n-dB down marker determines the 3 dB bandwidth of a bandpass filter at the press of a button. Precision is enhanced by through, short and open normalization methods.
SOLID RF PERFORMANCE Featuring a phase noise of –108 dBc (1 Hz) at 10 kHz offset (1 GHz carrier), a third-order intercept point of +20 dBm, 1 Hz to 10 MHz resolution bandwidth and –166 dBm displayed average noise level, the R&S®FPL1000 is comparable to higher class analyzers. This makes it the ideal tool for use in the lab, in production and for service tasks. The 1 dB attenuator step size (R&S®FPL1-B25 option) and the preamplifier (R&S®FPL1-B22 option) extend the usable dynamic range and sensitivity.
INTUITIVE USER INTERFACE Operating the R&S®FPL1000 is as intuitive as using a smartphone. You can configure the instrument and perform measurements with the touchscreen. A one-finger swipe across the screen adjusts the center frequency or the reference level. Two-finger gestures adjust the displayed span or level range. High-resolution display Flexible arrangement of results and MultiView The 10.1" screen with 1280 × 800 pixel resolution provides a precise representation of the signal.
10.1" HIGH-RESOLUTION DISPLAY 10.1" high-resolution display 1280 × 800 pixel resolution Hardkeys For setup, presets, etc. Two USB 2.
Soft menu selection ❙ Quick access to key tools ❙ Hardware settings at a glance Measurement setup buttons Control knob Numerical keypad With unit keys for frequency and level Generator output Internal generator output RF input Rohde & Schwarz R&S®FPL1000 Signal and Spectrum Analyzer 9
FULLY PORTABLE The R&S®FPL1000 signal and spectrum analyzer can be used almost everywhere. With a depth of only 23 cm, it fits into any workplace and leaves enough space for DUTs and other measuring instruments. Due to its low weight of 6 kg and the carrying handle, you can take it wherever you need it. Battery pack and 12 V/24 V power supply (option) The optional battery pack provides three hours of operation.
R&S®FPL1-K7 AM/FM/ΦM ANALOG DEMODULATION The R&S®FPL1-K7 option converts the R&S®FPL1000 into an analog modulation analyzer for amplitude, frequency and phase modulated signals. It measures the characteristics of the useful modulation and other items such as residual FM or synchronous modulation.
R&S®FPL1-K30 NOISE FIGURE AND GAIN MEASUREMENTS The R&S®FPL1-K30 noise figure and gain measurement option 1) allows you to characterize the most important amplifiers specifications. Using the Y-factor method, the noise figure and gain are measured with high accuracy independent of the instruments own noise figure. Typical applications for the R&S®FPL1-K30 include the characterization of amplifiers.
R&S®FPL1-K40 PHASE NOISE MEASUREMENT APPLICATION Phase noise is an important parameter in wireless communications systems. The R&S®FPL1-K40 option enables the R&S®FPL1000 to perform fast and easy phase noise measurements in development and production. Equipped with the R&S®FPL1-K40 option, the R&S®FPL1000 can measure single sideband phase noise across a selectable carrier offset frequency range displayed on a logarithmic axis.
R&S®FPL1-K54 EMI MEASUREMENT APPLICATION The R&S®FPL1-K54 EMI measurement application adds EMI diagnostic functionality to the R&S®FPL signal and spectrum analyzer. The R&S®FPL1-K54 offers EMI bandwidths for commercial and military applications, detectors such as quasi-peak, CISPR-average and RMS-average, limit lines and correction factors.
R&S®FPL1-K70 VECTOR SIGNAL ANALYSIS The R&S®FPL1000 analyzes and demodulates digitally modulated single-carrier signals with up to 40 MHz analysis bandwidth. Universities and research facilities will benefit from the instrument’s flexibility in analyzing proprietary signals. Developers of mobile communications devices and components can easily use the predefined standard settings.
R&S®VSE-K106 EUTRA/LTE NB-IOT MEASUREMENT SOFTWARE The R&S®FPL1000 can be used to analyze cellular 3GPP NB-IoT signals. It captures the signal, which is then analyzed by the R&S®VSE-K106 EUTRA/LTE NB-IoT measurement software 1). 1) R&S®VSE base software and R&S®FSPC license dongle required.
SPECIFICATIONS IN BRIEF Specifications in brief Frequency Frequency range R&S®FPL1003 R&S®FPL1007 5 kHz to 3 GHz 5 kHz to 7.5 GHz 1 × 10–6 1 × 10–7 0.01 Hz Aging per year with R&S®FPL1-B4 option Frequency resolution Bandwidth Resolution bandwidth (–3 dB) sweep filters FFT filters with R&S®FPL1-B40 option 100 kHz to 10 MHz in 1/2/3/5 sequence 1 Hz to 50 kHz in 1/2/3/5 sequence 12.8 MHz 40 MHz 5 MHz ≤ f < 3 GHz –152 dBm (typ.) 5 GHz ≤ f ≤ 7.5 GHz –143 dBm (typ.
ORDERING INFORMATION Designation Type Order No. R&S®FPL1003 R&S®FPL1007 1304.0004.03 1304.0004.07 R&S®FPL1-B4 R&S®FPL1-B5 R&S®FPL1-B9 R&S®FPL1-B9 R&S®FPL1-B10 R&S®FPL1-B19 R&S®FPL1-B22 R&S®FPL1-B25 R&S®FPL1-B30 R&S®FPL1-B31 R&S®FPL1-B40 1323.1902.02 1323.1883.02 1323.1925.03 1323.1925.07 1323.1890.02 1304.0427.02 1323.1719.02 1323.1990.02 1323.1877.02 1323.1725.02 1323.1931.02 R&S®FPL1-K7 R&S®FPL1-K9 R&S®FPL1-K30 R&S®FPL1-K40 R&S®FPL1-K54 R&S®FPL1-K70 R&S®FPL1-K70M R&S®FPL1-K70P 1323.1731.02 1323.
Warranty Base unit All other items 3 years 1 year 1) Options 1) Extended warranty, one year R&S®WE1 Extended warranty, two years R&S®WE2 Extended warranty with calibration coverage, one year R&S®CW1 Extended warranty with calibration coverage, two years R&S®CW2 Extended warranty with accredited calibration coverage, one year R&S®AW1 Extended warranty with accredited calibration coverage, two years R&S®AW2 Please contact your local Rohde & Schwarz sales office.
Rohde & Schwarz Worldwide Local und personalized Customized and flexible Uncompromising quality Long-term dependability The Rohde & Schwarz electronics group offers innovative solutions in the following business fields: test and measurement, broadcast and media, secure communications, cybersecurity, monitoring and network testing.
