User Manual

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
124User Manual 1178.3370.02 ─ 09
The result summary contains the following results:
●
"Compression Point": Level of compression
●
"Reference": Used reference point for calculation
●
"Generator Level": Input level of the DUT at which the compression occurs
●
"Measured Level": Output level of the DUT at which the compression occurs
Remote commands:
FETCh:CMEasurement:P1DB[:RESult]? on page 637
FETCh:CMEasurement:P3DB[:RESult]? on page 637
FETCh:CMEasurement:PNDB[:RESult]? on page 637
7.2.3.3 Power Sweep Compression Point Settings
Access: "Overview" > "Select Measurement" > "Power Sweep" > "Compr Points"
Measurements and Results