User Manual

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
235User Manual 1178.3370.02 ─ 09
In addition, a result table is displayed providing the following information:
●
First harmonic frequency
●
THD (total harmonic distortion), relative and absolute values
●
For each detected harmonic:
– Frequency
– RBW
– Power
Remote commands
The results can also be queried using remote commands.
The first harmonic frequency can be read out via the general center frequency com-
mand [SENSe:]FREQuency:CENTer on page 760.
THD: CALCulate<n>:MARKer<m>:FUNCtion:HARMonics:DISTortion?
on page 722
List of harmonics: CALCulate<n>:MARKer<m>:FUNCtion:HARMonics:LIST
on page 723
7.2.11.4 Harmonic Distortion Configuration
Access: "Overview" > "Select Measurement" > "Harmonic Distortion" > "Harmonic Dis-
tortion Config"
Measurements and Results