User Manual

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
262User Manual 1178.3370.02 ─ 09
The initial peak search for the R&S FPL1 EMI measurement is defined by the marker
configuration.
Selected Marker..........................................................................................................262
Marker State................................................................................................................262
Marker Position X-value..............................................................................................262
Marker Type................................................................................................................ 263
Reference Marker....................................................................................................... 263
Linking to Another Marker...........................................................................................263
Assigning the Marker to a Trace................................................................................. 263
Final Test Detector...................................................................................................... 264
Select Marker..............................................................................................................264
Selected Marker
Marker name. The marker which is currently selected for editing is highlighted orange.
Remote command:
Marker selected via suffix <m> in remote commands.
Marker State
Activates or deactivates the marker in the diagram.
Remote command:
CALCulate<n>:MARKer<m>[:STATe] on page 844
CALCulate<n>:DELTamarker<m>[:STATe] on page 842
Marker Position X-value
Defines the position (x-value) of the marker in the diagram. For normal markers, the
absolute position is indicated. For delta markers, the position relative to the reference
marker is provided.
Remote command:
CALCulate<n>:MARKer<m>:X on page 845
CALCulate<n>:DELTamarker<m>:X on page 843
Measurements and Results