User Manual

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
278User Manual 1178.3370.02 ─ 09
7.3.2.2 Power Sensor Settings
Access: "Overview" > "Input" > "Power Sensor" tab
The power sensor measurement requires the option R&S FPL1-K9.
Each sensor is configured on a separate tab.
State............................................................................................................................278
Continuous Value Update........................................................................................... 279
Select.......................................................................................................................... 279
Zeroing Power Sensor................................................................................................ 279
Frequency Manual...................................................................................................... 279
Frequency Coupling....................................................................................................279
Unit/Scale....................................................................................................................280
Meas Time/Average.................................................................................................... 280
Setting the Reference Level from the Measurement Meas -> Ref..............................280
Reference Value..........................................................................................................280
Use Ref Level Offset...................................................................................................280
Sensor Level Offset.....................................................................................................281
Average Count (Number of Readings)........................................................................281
Duty Cycle...................................................................................................................281
State
Switches the power measurement for all power sensors on or off. Note that in addition
to this general setting, each power sensor can be activated or deactivated individually
by the Select setting on each tab. However, the general setting overrides the individual
settings.
Receiving Data Input and Providing Data Output