User Manual

Getting Started
R&S
®
FPL1000
33User Manual 1178.3370.02 ─ 09
5.2.1.2 Power Key
The [Power] key is located on the lower left corner of the front panel. It starts up and
shuts down the instrument.
See also "Connecting to power" on page 9 and Chapter 5.1.5, "Connecting to Power",
on page 20.
5.2.1.3 USB
The front panel provides two female USB connectors (USB-A, 2.0 standard) to connect
devices like a keyboard or a mouse. A memory stick can be connected to store and
reload instrument settings and measurement data.
The rear panel provides further USB connectors (standard 3.0), see Chapter 5.2.2.8,
"USB", on page 40.
5.2.1.4 System Keys
System keys set the instrument to a predefined state, change basic settings, and pro-
vide print and display functions.
A detailed description of the corresponding functions is provided in the R&S FPL1000
user manual.
Table 5-2: System keys
System key Assigned functions
[Preset] Resets the instrument to the default state.
[Setup]
Provides basic instrument configuration functions, e.g.:
●
Reference frequency (external/internal)
●
Date, time, display configuration
●
LAN interface
●
Firmware update and enabling of options
●
Information about instrument configuration incl. firmware version and
system error messages
●
Service support functions (self-test etc.)
●
Self-alignment (with spectrum analysis option)
[Mode] Manages channel setups
[Print] Provides configuration settings for the print function
[FILE] Provides save/recall functions for instrument settings and measurement
results
Switches between the on-screen keyboard display:
●
At the top of the screen
●
At the bottom of the screen
●
Off
5.2.1.5 Function Keys
Function keys provide access to the most common measurement settings and func-
tions.
Instrument Tour