User Manual

The Spectrum Application (RF Measurements)

R&S

FPL1000

349User Manual 1178.3370.02 ─ 09

Function Activated marker or measurement function

Function Result Result of the active marker or measurement function

7.9.2 Marker Settings

Or: [MKR] > "Marker Config"

The remote commands required to define these settings are described in Chap-

ter 11.8.8.1, "Setting Up Individual Markers", on page 840.

● Individual Marker Setup........................................................................................ 349

● General Marker Settings....................................................................................... 352

7.9.2.1 Individual Marker Setup

Up to 17 markers or delta markers can be activated for each window simultaneously.

Initial marker setup is performed using the "Marker" dialog box.

The markers are distributed among 3 tabs for a better overview. By default, the first

marker is defined as a normal marker, whereas all others are defined as delta markers

with reference to the first marker. All markers are assigned to trace 1, but only the first

marker is active.

Selected Marker..........................................................................................................350

Marker State................................................................................................................350

Marker Position X-value..............................................................................................350

Frame (Spectrogram only).......................................................................................... 350

Marker Type................................................................................................................ 350

Reference Marker....................................................................................................... 350

Linking to Another Marker...........................................................................................351

Marker Usage