User Manual

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
362User Manual 1178.3370.02 ─ 09
Search Minimum
Sets the selected marker/delta marker to the minimum of the trace. If no marker is
active, marker 1 is activated.
For spectrogram displays, define which frame the minimum is to be searched in.
Remote command:
CALCulate<n>:MARKer<m>:MINimum[:PEAK] on page 854
CALCulate<n>:DELTamarker<m>:MINimum[:PEAK] on page 856
Search Next Minimum
Sets the selected marker/delta marker to the next (higher) minimum of the selected
trace. If no marker is active, marker 1 is activated.
For spectrogram displays, define which frame the next minimum is to be searched in.
Remote command:
CALCulate<n>:MARKer<m>:MINimum:NEXT on page 853
CALCulate<n>:MARKer<m>:MINimum:LEFT on page 853
CALCulate<n>:MARKer<m>:MINimum:RIGHt on page 854
CALCulate<n>:DELTamarker<m>:MINimum:NEXT on page 856
CALCulate<n>:DELTamarker<m>:MINimum:LEFT on page 856
CALCulate<n>:DELTamarker<m>:MINimum:RIGHt on page 856
Center Frequency = Marker Frequency
Sets the center frequency to the selected marker or delta marker frequency. A peak
can thus be set as center frequency, for example to analyze it in detail with a smaller
span.
This function is not available for zero span measurements.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:CENTer on page 759
Reference Level = Marker Level
Sets the reference level to the selected marker level.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:REFerence on page 776
7.9.4 Marker (Measurement) Functions
Access: "Overview" > "Analysis" > "Marker Functions"
Marker Usage