User Manual

Getting Started
R&S
®
FPL1000
37User Manual 1178.3370.02 ─ 09
21
14 15
4
6
138
3
10
9
11
16
5
7
12
Figure 5-3: Rear panel view
1+2 = Removable, rechargeable Li-ion batteries
3 = DC power connector
4 = AC power supply connection and main power switch with fuse
5 = GPIB (IEC 625) interface
6 = Reference clock connectors
7 = Trigger input connector
8 = "DVI" connector for external display
9 = "LAN" connector
10 = "USB" (3.0) connectors
11 = NRP power Sensor connector *)
12 = Headphones connector *)
13 = Aux. Port *)
14 = "IF/VIDEO OUT" connector *)
15 = NOISE SOURCE CONTROL *)
16 = Device ID with serial number and other labels
*) requires the "Additional Interfaces" option R&S FPL1-B5.
The meanings of the labels on the R&S FPL1000 are described in Chapter 2.2, "Labels
on R&S FPL1000", on page 11.
5.2.2.1 Li-Ion Battery Packs and DC Power Connector
With the Li-ion battery pack (option R&S FPL1-B31), the R&S FPL1000 can be oper-
ated independently of an AC or DC power supply. The instrument can house 2 Li-ion
batteries which can be charged both via AC or DC power supply.
For safety information concerning batteries, see "Handling batteries safely"
on page 10.
As an alternative, a DC power supply connector (option R&S FPL1-B30) is available.
DC power supplies from +12 V to +24 V and from 13 A to 6.5 A can be used. Connect
the connector according to the following diagram:
Instrument Tour