User Manual

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
393User Manual 1178.3370.02 ─ 09
s = sample number
x = sample offset from s
n = aperture size
7.10.1.2 Trace Settings
Access: "Overview" > "Analysis" > "Traces"
Or: [TRACE] > "Trace Config"
You can configure the settings for up to 6 individual traces.
For settings on spectrograms, see Chapter 7.10.2.2, "Spectrogram Settings",
on page 407.
Trace 1/Trace 2/Trace 3/Trace 4/Trace 5/Trace 6.......................................................393
Trace Mode................................................................................................................. 394
Detector.......................................................................................................................394
Hold.............................................................................................................................395
Smoothing...................................................................................................................395
Average Mode.............................................................................................................395
Average Count............................................................................................................ 396
Predefined Trace Settings - Quick Config...................................................................396
Trace 1/ Trace 2/ Trace 3/ Trace 4 (Softkeys).............................................................397
Copy Trace..................................................................................................................397
Trace 1/Trace 2/Trace 3/Trace 4/Trace 5/Trace 6
Selects the corresponding trace for configuration. The currently selected trace is high-
lighted.
For details see Chapter 7.10.1.3, "How to Configure a Standard Trace", on page 397.
Trace Configuration