User Manual

Getting Started
R&S
®
FPL1000
46User Manual 1178.3370.02 ─ 09
Figure 5-7: Spectrogram of the calibration signal
5.3.3 Activating Additional Measurement Channels
The R&S FPL1000 features multiple measurement channels, i.e. you can define sev-
eral measurement configurations in parallel and then switch between the channel set-
ups automatically to perform the measurements sequentially. We will demonstrate this
feature by activating additional measurement channels for a different frequency range,
a zero span measurement, and an I/Q analysis.
To activate additional measurement channels
1. Press the [Mode] key on the front panel.
2. On the "New Channel Setup" tab of the "Mode" dialog box, tap the "Spectrum" but-
ton.
Trying Out the Instrument