User Manual

Data Management
R&S
®
FPL1000
492User Manual 1178.3370.02 ─ 09
8.5.1.3 Measurement Information
Access: > "Report menu" > "Templates" > "General" > "▽" > "Measurement Informa-
tion"
The "Measurement Information" area allows you to add user-defined information on the
measurement to the report.
You can add up to six lines to the report, plus one picture, for example a company logo.
The first line is a heading. Each of the following five lines consists of a title and a value,
which is displayed next to the title. The information can be global, that is: valid for the
entire report, or specific to an individual measurement. In this case, you define the
actual value when you store the measurement data.
Figure 8-4: Dialog box for measurement information when appending data to a report
Working with Test Reports