User Manual

Data Management
R&S
®
FPL1000
495User Manual 1178.3370.02 ─ 09
For the R&S FPL1000, test reports are only available in Spectrum mode, and only if
the R&S FPL1-K54 is installed.
For details on the provided information, see:
●
"Diagram" on page 117
●
"Spectrogram" on page 119
●
"Marker Table" on page 117
●
"Marker Peak List" on page 118
●
"Result Summary" on page 118
●
Chapter 9.7, "Transducers", on page 523
●
"LISN Control Settings" on page 268
●
Result list: a table that contains the trace values for each trace point
A maximum of 50001 measurement points per trace are written to the report. The
rest is dismissed.
If you have more measurement points, export the data to an ASCII file (see "Export
Trace to ASCII File" on page 448 ).
●
Settings: basic instrument and measurement-specific settings (as indicated in the
channel setup bar)
Select All / Select None
Selects or deselects all items in the corresponding area:
●
Diagrams
●
Tables
●
All items
Remote command:
HCOPy:TREPort:ITEM:SELect on page 948
8.5.2 Managing Templates
Access: > "Report menu" > "Templates"
Some general functions to manage test report templates are available on all "Tem-
plates" subtabs.
Template name............................................................................................................495
Save............................................................................................................................496
Load............................................................................................................................ 496
Default.........................................................................................................................496
Template name
Enter the path and filename of the template in the input field, or select the directory
using the "..." button.
Working with Test Reports