User Manual

Data Management
R&S
®
FPL1000
498User Manual 1178.3370.02 ─ 09
Save
Access:
> "Report menu" > "Save"
Saves the test report with the selected items to the selected Report Path with the
selected File type. If the option Suppress Dialog is enabled, the report is saved to the
directory specified in the general contents area (see Report Path).
Tip: before saving the report, check the contents using the Show Preview function.
Remote command:
Print mode: HCOPy:MODE on page 944
Report name and directory: MMEMory:NAME on page 922
Print report: HCOPy[:IMMediate<1|2>] on page 935
Selecting items to include in the report
By default, all datasets and subsets stored for the test report are included (see Chap-
ter 8.5.3, "Creating Datasets", on page 496). However, you can remove individual data-
sets or subsets before creating the report.
Each dataset is indicated by the date and time it was stored. A dataset can contain
subsets for individual results.
To delete an item, select the "X" next to the item.
Remote command:
HCOPy:TREPort:TEST:REMove on page 951
Remove All ← Selecting items to include in the report
Deletes all items currently stored for the test report.
Remote command:
HCOPy:TREPort:TEST:REMove:ALL on page 952
Working with Test Reports