User Manual

General Instrument Setup
R&S
®
FPL1000
512User Manual 1178.3370.02 ─ 09
9.4 System Configuration Settings
Access: [Setup] > "System Configuration"
● Hardware Information............................................................................................512
● Information on Versions and Options....................................................................512
● System Messages.................................................................................................514
● Firmware Updates.................................................................................................515
● General Configuration Settings.............................................................................516
● Additional Interfaces..............................................................................................517
9.4.1 Hardware Information
Access: [Setup] > "System Configuration" > "Hardware Info"
An overview of the installed hardware in your R&S FPL1000 is provided.
Every listed component is described by its serial number, order number, model infor-
mation, hardware code, and hardware revision.
This information can be useful when problems occur with the instrument and you
require support from Rohde & Schwarz.
Remote command:
DIAGnostic:SERVice:HWINfo? on page 972
DIAGnostic:SERVice:BATTery:LEVel? on page 972
9.4.2 Information on Versions and Options
Access: [Setup] > "System Configuration" > "Versions + Options"
Information on the firmware version and options installed on your instrument is provi-
ded. The unique Rohde & Schwarz device ID is also indicated here, as it is required for
license and option administration.
You can also install new firmware options in this dialog box.
System Configuration Settings